How to Price a Restaurant Menu in India (Without Guessing)

A menu pricing strategy for Indian restaurants: set a cost floor, handle GST in the printed price, check competitors and use menu engineering to fix weak items.

To price a restaurant menu, start from each dish's ingredient cost and divide it by your target food cost percentage to get a floor price before GST. Add GST if you print tax-inclusive prices, check what nearby places charge, round to a clean price point, and then use monthly sales to adjust items that sell well but earn little.

Ravi runs a 40-seat South Indian restaurant in Mysuru. His masala dosa uses about ₹28 of batter, potato filling, oil, chutney and sambar. He wants food cost near 30%, so his floor price before GST is ₹28 ÷ 0.30 = about ₹93. He prints prices including GST, so ₹93 becomes ₹97.65, which he rounds to ₹99 on the menu. Three places nearby charge ₹80, ₹90 and ₹110. At ₹99 he sits in the middle and still covers his costs.

That is the whole method in one dish. The rest of this post walks through each step, then shows how to look at the full menu at once.

What is the right way to price a restaurant menu item?

Price from your own cost first and the market second. Your cost sets the lowest price you can live with. The market tells you how far above that floor you can go.

Plate cost is the cost of every ingredient in one serving, including oil, garnish and the takeaway box. Food cost percentage is plate cost divided by the selling price before GST. If you have not worked out plate costs yet, do that first; it is the base for everything below.

The full recipe costing method, with rupee examples for a coffee and a sandwich, is here: Food Cost Percentage for a Cafe: How to Calculate It

Once you have plate costs, follow the same steps for every item:

Step 6 matters because rounding moves the number. Ravi's ₹99 menu price is ₹94.29 before GST (₹99 ÷ 1.05), so his real food cost is ₹28 ÷ ₹94.29 = 29.7%. Close enough to his target.

Should menu prices include GST?

You can show prices either way, but say clearly which one you use. Customers dislike seeing ₹99 on the menu and ₹103.95 on the bill without warning. If you print prices before tax, add a visible line such as "Prices exclusive of 5% GST".

As of October 2026, a standalone restaurant or cafe registered under regular GST charges 5% on food and drinks served, split as 2.5% CGST and 2.5% SGST, with no input tax credit. A restaurant inside a hotel where any room has a declared tariff of ₹7,500 or more per day charges 18% with credit. If you are under the composition scheme, you cannot add GST to the bill at all; you pay 5% of your turnover from your own pocket, so build that into your prices.

The arithmetic for tax-inclusive prices is simple. To go from a pre-tax price to a menu price, multiply by 1.05. To go back, divide by 1.05. A ₹199 menu price is ₹189.52 of sales and ₹9.48 of GST. Only the ₹189.52 is yours. Confirm your rate and scheme with your CA before printing a new menu.

How do you check competitor prices without copying them?

Look at two or three places that serve the same kind of customer, not the most famous restaurant in town. Note the price, the portion and what comes with it. A ₹90 dosa with two chutneys and sambar is not the same product as a ₹90 dosa with one chutney.

If your floor price is well below the market, you have room to charge more or to give a slightly bigger portion. If your floor price is above the market, do not just match the competitor. Change the recipe, the portion or the supplier until the numbers work, or drop the dish. Selling below cost to match a neighbour only makes you busy, not profitable.

Why do menu prices end in 9 or 0?

Price points are the round-looking numbers customers are used to seeing, such as ₹49, ₹99, ₹149 or ₹120, ₹150, ₹180. Nobody prints ₹97.65. Pick one style and use it across the menu so it looks deliberate. Many cafes use prices ending in 9; many family restaurants use round tens because they make totals easier to check.

Round up when the next price point is close, and round down only when the item is a traffic builder you want people to notice. Moving 30 items up by ₹1 to ₹4 each to reach clean price points can add more to the month than one big price rise on a single dish.

What is menu engineering?

Menu engineering is a way of sorting every item by two things: how many plates it sells and how much money each plate leaves after ingredients. That second number is called contribution margin: the price before GST minus the plate cost. The method was set out by hospitality researchers Michael Kasavana and Donald Smith in the early 1980s, and it is still the standard way to review a menu.

Here is a simple version of Ravi's breakfast section for one month, with prices before GST:

Total plates are 3,500, so the average per item is 700. Total contribution is ₹2,23,200, so the average per plate is about ₹64. Now each item falls into one of four boxes:

Run the table separately for each section: breakfast, mains, drinks, desserts. A ₹40 tea will always look weak next to a ₹250 thali. Comparing within a section shows which tea or which thali is pulling its weight.

You need two numbers from your billing for this: plates sold per item and plate cost per item. In Mapis, the item report gives plates sold, and a menu item linked to its recipe shows its plate cost, so the table takes minutes instead of an evening with a calculator.

How often should you change menu prices?

Review costs every month and prices every three to six months. Change sooner if a key ingredient such as paneer, oil or milk jumps in price. Small, regular changes are easier on regulars than one large jump once a year.

I used to raise every price by ₹10 once a year and lose customers for a month. Now I move a few items by ₹5 when the costs move, and nobody complains.

When you do change prices, check the floor price again for every item you touched, update the printed menu and the billing system on the same day, and watch plate counts for two weeks to see whether any item dropped sharply.

If you want item-wise sales and food cost in one place when you sit down to reprice: See how Mapis handles restaurant billing

Start with your ten best sellers. Cost them, check them against the market, and sort them into the four boxes. That one sheet will tell you where your next price change should be.

Frequently asked questions

How do I calculate the price of a food item for my restaurant?

Work out the plate cost, which is the cost of every ingredient in one serving. Divide it by your target food cost percentage to get the minimum price before GST. For example, a ₹28 plate cost at a 30% target gives about ₹93. Add GST if your menu shows tax-inclusive prices, compare with nearby places, and round to a clean price.

Should restaurant menu prices include GST in India?

You can print prices including or excluding GST, but the menu should say which one you use so the bill is not a surprise. As of October 2026, a standalone restaurant on regular GST charges 5%. A tax-inclusive price of ₹99 means ₹94.29 of sales and ₹4.71 of GST. Composition scheme restaurants cannot add GST to the bill.

What is menu engineering in a restaurant?

Menu engineering sorts menu items by how many plates they sell and how much each plate earns after ingredients. Items that sell well and earn well are stars. Popular items that earn little are plowhorses. Items that earn well but sell little are puzzles. Items weak on both are dogs, and are usually reworked or removed.

What is contribution margin on a menu item?

Contribution margin is the selling price before GST minus the plate cost. A dosa that sells for ₹95 before GST and uses ₹28 of ingredients has a contribution margin of ₹67. It shows how much each plate adds towards rent, salaries and profit, which is often more useful than food cost percentage alone when comparing dishes.

How often should a restaurant increase menu prices?

Review ingredient costs every month and prices every three to six months, or sooner when a key ingredient rises sharply. Small increases of ₹5 on a few items at a time are usually easier for regular customers than one large rise once a year. After any change, watch plate counts for two weeks.